Ati-amplifier-technologies ATP8700 Bedienungsanleitung PDF herunterladen (Seite 28)

Using Preprogrammed Codes

The A/V PROCESSOR remote can be programmed to operate

other audio or video components in your system. The AVC

button is used exclusively for control of the A/V PROCESSOR.

To program the remote to control another device, you must

nter a four-digit code. Codes for a wide variety of devices

and brands are provided in the following pages. More than

one setup code number may work with your device. You

should test the functions for each of the code numbers that

work with your device to determine the best one for your

particular unit.

The procedure for setting up the A/V PROCESSOR remote to

control a TV/VCR is different—see Programming TV/VCR

Control below.

NOTE: Some devices, such as CD players and DVD players

that do not have power buttons on their original remote

controls, may not shut off during programming. For these

devices, it may be necessary to first store the setup code

number and then test functions like PLAY, STOP, etc, to

determine if the correct number has been selected.

To Program Using Four-digit Codes:

1. Turn on the device you would like the remote control to

operate, either manually or with its original remote control.

2. Find the four-digit setup code number for your device from

the tables on pages 29 through 33.

3. On the A/V PROCESSOR remote, press the component key

(near the top of the remote) that corresponds to the device

you want to control.

You can choose from CBL, AUX, VCR, TV, SAT, CD, or AMP.

NOTE: The codes for controlling DVD players are

ogrammed into the AUX button.

Press and hold SETUP on the remote until the red LED at

he top of the remote blinks twice, then release SETUP.

5. Enter the first four-digit code for your component.

The LED should blink twice. If it does no

t, then repeat

teps 3, 4, and 5 abov

e, using the same code.

6. Aim the remote at the component and press PWR once.

The component should turn off. If it does not respond,

epeat steps 3, 4, and 5, trying eac

h code for your brand

until you find one that works. If it still does not work, try

searching for the code (see Searching For Your Code, below).

epeat the process for other components you wish to

control with the A/V PROCESSOR remote.

OGRAMMIN

G T

V/VCR CONTROL

The A/V PROCESSOR can control TV/VCR combo units, but

the procedure is somewhat different than entering codes to

ontrol other components. As with other components, you

must enter a four-digit code. Codes for many TV/VCR brands

are provided in the following pages. More than one setup

code number may work with your device. You should test the

functions for each of the code numbers that work with your

evice to determine the best one for your particular unit.

If you want to control TV functions besides power on/off, you

may need to enter a separate TV code, as described below.

To Program TV/VCR Control:

1. Turn on the TV/VCR, either manually or with its original

remote control, and insert a video cassette.

2. Find the four-digit code for your TV/VCR from the tables

on pages 29 to 33. Your TV/VCR may have a separate TV

code listed. If so, be sure to note both codes.

3. On the A/V PROCESSOR remote, press VCR.

Press and hold SETUP until the red LED blinks twice, then

release SETUP.

5. Enter the first four-digit code for your component. If the

code entry is performed correctly, the LED will blink twice.

If it does not, then repeat steps 3, 4, and 5, using the same

four-digit code.

6. Aim the remote at the TV/VCR and press PWR once. The

TV/VCR should turn off. If it does not respond, repeat

steps 3, 4, and 5, trying each code for your brand until you

find one that works. If it still does not work, try searching

for the code (see Searching For Your Code).

7. If your component has a separate TV code listed, press TV

on the A/V PROCESSOR remote. The LED will blink twice.

8. Enter the four-digit TV code for your TV/VCR combo. If the

code is entered correctly, the LED will blink twice. If it does

not, then repeat steps 7 and 8 using the same four-digit code.

SEARCHING FOR YOUR CODE

If y

our de

vice does not respond to the remote after you have

tried all codes listed for your brand, or if your brand is not

listed at all, try searching for your code.

To Search for a Code for Your Component:

1. On the A/V PROCESSOR remote, press the button near the

op of t

he r

emo

te for the type of device you want to control.

You can choose CBL, AUX, VCR, TV, SAT, CD, or AMP.

2. Press and hold SETUP until the red LED on the remote

blink

s twice, t

hen r

elease SETUP

3. Enter 991. The LED will blink twice.

4. Aim the remote control at the component and slowly

alter

nate between pressing PWR and the button for the

device you pushed in step 1.

5. Stop when the TV turns off.

ess SETUP once.

7. To search for the codes of your other components, repeat

the process, using the appropriate button for the new

vice in s

teps 1 and 4.

Page 28

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Ati-amplifier-technologies ATP8700 Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern