Ati-amplifier-technologies ATP8700 Bedienungsanleitung PDF herunterladen (Seite 22)

System Setup

IMPORTANT NOTE: YOU MUST PRESS THE AVC BUTTON

NEAR THE TOP IN ORDER TO ACTIVATE THE REMOTE

. Press the MASTER POWER ON/OFF SWITCH on the unit’s

rear panel in until it latches. The STBY indicator on the

front panel will glow.

2. Select a button (such as DVD, VCR, or AUX) on the remote

control. The front-panel TFT display will illuminate.

To Initially Set Up the A/V PROCESSOR

1. Press the MENU button on the remote control to display

the Main Menu. The MAIN MENU appears on-screen:

4. Tuner and PAL/NTSC Settings

These settings are for the FM tuner OS video setting. Press

the number corresponding to your location for the tuner

setting. An “X” following the region indicates the current

setting. The “TV Setting” must be made according to your

location. NTSC for North America and PAL for most of Europe.

On-Screen Message On/Off

When y

ou adjust the volume or select a different input, a

confirming text message appears on the screen of your video

monit

or. You can deactivate this function for specific inputs if

ou wish. The on-screen menu sys

tem will still function even

when on-screen messages are deactivated.

o T

urn On-screen Messages On and Off:

1. From the MAIN MENU, select #8 STATUS DISPLAY.

2. Press SELECT to turn on-screen messages on and off for

hat input. On screen messag

es will now be seen only on

the A/V PROCESSOR's TFT monitor.

Speaker Placement

The bes

t speak

er placement f

or your particular room will

depend on its size, fur

nishings, seating ar

ang

ement, and t

acoustical properties of the space (including room size, wall

type, co

ings, and various other factors).

Due to the complex nature of these variables, it is impossible

o recommend any one-size-fits-all placement. You may have

to experiment with various placement options to determine

the best configuration for your specific situation. Please note

that proper configuration and placement of your speaker

systems is critical for achieving the best possible surround

ound reproduction.

Here are some basic recommendations you should consider

when positioning your speakers:

Front Left, Center and Right Speakers

■ These speakers should be placed at the same

relative height from the floor and a similar distance

from any walls. Most speakers sound best when

located with the tweeter at ear height when you’re

seated. Typically, the further away from the walls

he speakers are, the better they will sound.

■ Ensure that the speakers are aimed at the listener’s

ears within your chosen seating position.

Surround Left and Right Speakers

■ Place these speakers so that their height is

approximately 1 meter (3 feet) higher than that of

the listener’s ears, if feasible.

■ Place these speakers to the sides of, or slightly

behind, the primary listening position.

Surround back left and back right speakers

These speakers are required for Dolby Digital EX, DTS ES,

Dolby Pro Logic IIx, and 7-Channel Stereo. They are also

desirable—though not required—for DTS Neo:6.

■ Place these speakers behind the listener so that the

angle between each speaker and the listener is

approximately 30 degrees.

■ Place these speakers so that their height is 1 meter

(3 f

t) higher than that of the listener’s ears.

Subwoofer

Subwoofer placement can frequently be a trial-and-error

air

, as bass ener

gy sets up “standing waves” in most every

room. These standing waves can cause areas with too much

bass, areas with too little bass, and areas in between. You

y ha

e t

o move the subwoofer and/or the prime listening

area to improve the bass response. Be aware that every

surface you place the woofer close to (one wall, the floor, two

alls in a corner) will increase the overall apparent bass in

the room. But this can potentially lead to boomy and muddy

sounding bass.

When connecting any speakers, be sure to read the instruction

manual(s) that came with the product and check your power

plif

ier’s instruction manual for proper hook-up of the

loudspeaker systems.

Page 22

1 QUICK SETUP-SPEAKER SIZE

2 QUICK SETUP-SPEAKER DIST

3 INPUT ASSIGNMENT

4 PAL/NTSC SETTINGS

5 BASS TRIM

6 CALIBRATION

OFF

7 COMPRESSION ON

8 STATUS DISPLAY NO

9 DVD AUDIO FULLRANGE NO

0 RESET TO DEFAULTS

EXIT

MAIN MENU

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Ati-amplifier-technologies ATP8700 Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern