Ati-amplifier-technologies ATP8700 Bedienungsanleitung PDF herunterladen (Seite 15)

Connecting Video Components

Before making connections to any video devices, it will help to

understand how the A/V PROCESSOR routes the video portion

of the signal.

■ A

ny signal that appears at the composite video input

jacks is automatically sent to the composite and

S-Video video output and video record output jacks.

■ Any signal that appears at the S-Video input jacks is

automatically sent to the composite and S-Video

video output and video record output jacks.

■ Any signal that appears at the component video

input jacks is automatically sent to the component

video output jacks only.

■ Any signal that appears at the DVI video input jacks

is automatically sent to the DVI video output jack only

(ATP8700).

NOTE: To provide the greatest flexibility, you should connect a

composite or S-Video cable from all of your video devices to the

A/V PROCESSOR, even if you are already using a component

video. This will allow all of your video sources to be visible

in the second zone, if you are using the A/V PROCESSOR’s

multi-zone capability.

Also, because the A/V PROCESSOR’s on-screen display does

not appear on the component outputs, S-Video, or composite

video connections should be used.

DVD PLAYER

Composite Connect the composite video output from the

DVD player to the DVD composite video input jack on the rear

of the A/V PROCESSOR using an RCA-type video cable.

S-Video If there is an S-Video output on the DVD player, and

ou have an S-Video input on your TV or monitor, connect it to

the S-Video DVD input on the rear of the A/V PROCESSOR

using an S-

Video cable. S-Video delivers a better picture than

com

posite connections and should be used whenev

possible—unless you can use component or DVI connections,

whic

h deliver better pictures than S-Video.

Component Video If the DVD player has component video

outputs, connect them to the component DVD input jacks on

he rear of the A/V PR

OCESSOR.

DVI/HDMI If the DVD player has a DVI or HDMI video output,

and y

our T

V/monit

or has a DVI or HDMI input, connect it to

the DVI DVD input jack on the rear of the A/V PROCESSOR

(ATP8700). For HDMI-equipped DVD players, use an

HDMI-t

o-D

VI adap

ter.

Page 15

Analog Audio Connect the L and R channel outputs on the

VD player to the DVD analog audio jacks on the rear of the

A/V PROCESSOR.

Digital Audio Connect the digital output jack on the DVD

player to one of the coaxial or optical input jacks on the rear

f the A/V PROCESSOR, depending on the type of connector

used by the DVD player. Later, you will configure the A/V

PROCESSOR to use the specific digital audio input that you

have chosen. For now, note which digital input you connected

to on your system chart.

Multi-Channel Audio If your DVD player supplies a

multi-channel audio output for DVD-Audio or SACD playback,

connect the six outputs from your player to the 7.1 INPUT jack

set on the rear panel of the A/V PROCESSOR. Use the FRONT

L&R, SURR L&R, CEN and SUB jacks; ignore the jacks labeled

ACK L&R. (These are intended to accommodate 7.1-channel

audio technology if it appears in the future.) Be careful to

match the connections–L to L, right surround to SURR R, cen-

ter to CEN, and so on. If your player includes a built-in Dolby

Digital decoder with 5.1-channel analog audio outputs but no

DVD-A or SACD capability, we suggest that you do not use

them. Use one of the A/V PROCESSOR’s digital audio inputs

instead–you’ll get better sound.

Note: You must use the 7.1 INPUTS multi-channel audio input

for SACD and DVD-Audio players in order to hear the

high-resolution sound these players provide. Do not use the

digital audio inputs.

VIDEO RECORDER

A video recording device such as a VCR, PVR (such as TiVo

Replay

, DishPlayer

, or similar device) or DVD recorder can be

connected to the A/V PROCESSOR using the following methods.

Com

posit

Connect t

he com

posite video output from the

recording device to the any of the composite video input jacks

on the rear of the A/V PROCESSOR. Connect the recording

vice

’

s com

posite video input to any of the composite video

record output jacks of the A/V PROCESSOR.

S-

ideo

If t

her

e is an S-

ideo output on the recording device,

connect it to any of the S-Video input jacks on the rear of the

A/V PROCESSOR. Connect the recording devices S-Video input to

y of t

he S-

ideo record output jacks on the A/V PROCESSOR.

S-Video delivers a better picture than composite connections

and should be used whenever possible, unless you can use

com

ponent or DVI connections.

Component Video If the recording device has a component

video output, and y

our T

V has a com

ponent video input,

connect the recording device to one of the component video

input jacks on the rear of the A/V PROCESSOR.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Ati-amplifier-technologies ATP8700 Bedienungsanleitung Seite 15

Kommentare zu diesen Handbüchern