Ati-amplifier-technologies ATP8700 Bedienungsanleitung PDF herunterladen (Seite 18)

Amplifier Connections

IMPORTANT NOTE: BEFORE ATTEMPTING TO MAKE ANY

CONNECTION TO YOUR POWER AMPLIFIER, MAKE SURE

THE AMPLIFIER IS TURNED OFF AND/OR DISCONNECTED

FROM AC POWER. FAILURE TO DO SO CAN RESULT IN SEVERE

DAMAGE TO YOUR AMPLIFIER AND/OR LOUDSPEAKERS.

Before attempting to make any connection to your power

plif

ier, make sure the amplifier is turned off and/or

disconnected from AC power. Failure to do so can result in

severe damage to your amplifier and/or loudspeakers.

Main Zone

Use the audio jacks labeled AUDIO VIDEO OUTPUTS to connect

the A/V PROCESSOR to an external power amplifier such as

those from ATI. The A/V PROCESSOR can output up to 7.1

channels of sound (seven main channels and one subwoofer),

even when you are listening to 2-channel stereo material.

The output jacks supplied by the A/V PROCESSOR are: Front

Left and Right, Surround Left and Right, Surround Back Left

and Right, and Subwoofer (SUB) and Center (CEN).

Be sure to verify that the correct outputs are connected to the

appropriate input jacks on your amplifier—for example, Front

Left to Front Left, Surround Back Right to Surround Back

Right, etc. If the inputs on your amplifier are not labeled, it

probably does not matter which of the A/V PROCESSOR’s

output channels is connected to a particular amp channel.

However, you must be sure that the appropriate speaker is

connected to that amp channel.

When a powered subwoofer is used, connect the Subwoofer

output jack to the Line Input jack on your subwoofer (use

either the Left or Right input if your subwoofer has both) and

follow any specific connection and/or configuration

instructions supplied with the subwoofer. If your subwoofer

is a passive speaker (with no built-in amplifier), connect the

subwoofer output jack on the A/V PROCESSOR to the input of

the amplifier used to power the subwoofer, and then connect

the subwoofer speaker itself to the amplifier.

The ATP8700 offers both balanced (XLR) and unbalanced

(RCA) outputs. If your amplifier has balanced inputs, we

recommend you use balanced audio cables between the

ATP8700 and your amplifier. Using balanced cables could result

in a slight reduction in noise, and because XLR connectors

lock into place, they cannot come loose as RCA connectors can.

On the ATP8700, both balanced and unbalanced jacks are

active all of the time, so you can mix them up–for example,

using balanced connections for a high-end stereo amplifier

connected to your front left and right speakers, and

unbalanced connections for all of the other channels.

ATP8700

Connecting an External Amplifier to Your A/V Processor

Page 18

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Ati-amplifier-technologies ATP8700 Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern